An empirical solar radiation pressure model for satellites moving in the orbit-normal mode

We present a family of empirical solar radiation pressure (SRP) models suited for satellites orbiting the Earth in the orbit normal (ON) mode. The proposed ECOM-TB model describes the SRP accelerations in the so-called terminator coordinate system. The choice of the coordinate system and the SRP parametrization is based on theoretical assumptions and on simulation results with a QZS-1-like box-wing model, where the SRP accelerations acting on the solar panels and on the box are assessed separately. The new SRP model takes into account that in ON-mode the incident angle of the solar radiation on the solar panels is not constant like in the yaw-steering (YS) attitude mode. It depends on the elevation angle of the Sun above the satellite’s orbital plane. The resulting SRP vector acts, therefore, not only in the Sun-satellite direction, but has also a component normal to it. Both components are changing as a function of the incident angle. ECOM-TB has been used for precise orbit determination (POD) for QZS-1 and BeiDou2 (BDS2) satellites in medium (MEO) and inclined geosynchronous Earth orbits (IGSO) based on IGS MGEX data from 2014 and 2015. The resulting orbits have been validated with SLR, long-arc orbit fits, orbit misclosures, and by the satellite clock corrections based on the orbits. The validation results confirm that—compared to ECOM2—ECOM-TB significantly (factor 3–4) improves the POD of QZS-1 in ON-mode for orbits with different arc lengths (one, three, and five days). Moderate orbit improvements are achieved for BDS2 MEO satellites—especially if ECOM-TB is supported by pseudo-stochastic pulses (the model is then called ECOM-TBP). For BDS2 IGSOs, ECOM-TB with its 9 SRP parameters appears to be over-parameterized. For use with BDS2 IGSO spacecraft we therefore developed a minimized model version called ECOM-TBMP, which is based on the same axis decomposition as ECOM-TB, but has only 2 SRP parameters and is supported by pseudo-stochastic parameters, as well. This model shows a similar performance as ECOM-TB with short arcs, but an improved performance with (3-day) long-arcs. The new SRP models have been activated in CODE’s IGS MGEX solution in Summer 2018. Like the other ECOM models the ECOM-TB derivatives might be used together with an a priori model.     

可靠性设计优化的球空间设计法

可靠性设计优化（RBDO）在航空航天等领域已经被广泛应用，具有显著提高可靠性的效果；然而它包含两个迭代循环-总体优化循环和可靠性分析循环，双循环求解方法效率低下甚至难以承受。本文提出一种可以提高可靠性设计优化求解效率的方法-球空间设计法，该方法可以方便地表达搜索区域，最大可能失效点可以从极值点处精确获取；同时，该方法可以将总体优化以及可靠性分析同步进行。本文所提出的球空间法的有效性将通过2个算例进行测试，测试结果表明该方法不仅精度与同类方法持平，求解效率有明显提升，它将会对提高航空航天装备如卫星、火箭、飞行器等产品的可靠性提供更为有效的方法和技术支持。     

空间目标监视雷达信号频率的优选准则

随着在轨微小卫星及空间碎片数量不断增加，为保证在轨卫星的运行安全，需要对微小目标进行有效跟踪探测及稳定编目。雷达作为近地空间目标监视的主用设备，在对厘米级小目标进行探测跟踪时，其工作频率是决定其能否可靠探测关键因素，高频有利于探测小目标，并可获得相对稳定的RCS，但高频信号的波束小、搜索能力较低，实现难度大，也使得成本过高。为适于实际工程应用，需从效费比出发，对频率进行优选。本文从目标RCS的角度提出一种空间目标监视雷达信号频率的优选准则，给出该准则下周长波长比ka的取值范围。为了更加清楚地说明该优选准则的应用，给出了直径5 cm和10 cm的目标在该准则下信号频率的取值范围，并与国外工作做了比较，证明该准则可行。     

超临界环境下煤油替代物液滴燃烧特性数值研究

为研究液氧/煤油火箭发动机燃烧室内经喷注形成的煤油液滴的燃烧过程，基于实际气体状态方程、高压热物性修正、高压气液平衡和详细化学反应动力学，建立一维的全瞬态液滴燃烧模型，对超临界环境下两组分煤油替代物液滴的燃烧特性及液滴初始直径的影响进行仿真研究。结果表明，在超临界环境下，相比于煤油液滴纯蒸发过程，煤油液滴燃烧过程的迁移时刻大大提前；煤油液滴着火之后很快进入超临界燃烧阶段，此时液滴燃烧过程可以看成中心附近的燃料高浓度区与外侧氧气高浓度区之间的扩散燃烧过程；煤油液滴的火焰半径先增大，达到最大值之后开始减小，并减小为零，火焰温度在着火之后快速上升至最大值，并基本保持不变，在火焰半径减小为零之后开始降低；随着液滴初始直径的增大，火焰特性以及液滴中心参数变化曲线趋势不变、整体延迟，着火时间、迁移时间和液滴寿命增大。     

The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

地外人工光合成装置研制与试验

原位资源利用技术是地外生命保障体系构建、实现人类地外生存的有效途径，是载人深空探索的核心技术。基于微通道技术的人工光合成反应器，采用流动反应器设计，用于低微重力等特殊环境条件下模拟人工光合作用，实现CO２向O２和含碳燃料的转化。微通道芯片通过气液剪切作用力使气体反应产物快速脱离电极表面并随反应介质排出反应器，理论上可以克服微重力条件对反应过程的影响，尚需进行微重力试验进行验证。同时，微通道结构可以通过精确控制反应气液的压力、流速、流量比等反应条件，获得优化的反应条件。通过地面试验，验证了该反应器将CO２还原为O２和含碳化合物的功能可行性。以Au和Ir/C作为阴极和阳极材料，3V电压条件下，O２产率可达11.74mL/h。此外，基于人工光合成反应器搭建了集反应模块、控制模块、流路驱动模块以及检测模块等于一体的地外人工光合成装置，形成原位反应、介质供给、精确控制、在线收集和检测等功能一体化的系统，并实现CO２有效转换和O２供给。为后续技术成熟度更高的反应装置研制、高产物选择性的含碳化合物转化以及人工光合成反应装置在轨试验奠定了理论和实践基础。     

一种柔性空间双臂机器人的协同控制和避障方法

针对柔性空间机械臂在轨服务应用需求，提出一种基于刚体运动与柔性振动相耦合的空间双臂机器人协同控制方法.首先引入空间位姿变量的概念，构造出面向协同控制目标的Jacobian矩阵，建立柔性空间机器人系统的刚柔耦合动力学模型，基于指定的最小距离得到其运动学逆解，并根据系统动量矩守恒关系及系统的Jacobian矩阵，并根据机械臂末端的运动速度,然后采用阻尼最小二乘法得出关节角度，使柔性空间机器人能够有效完成协同控制和空间避障任务，并基于RecurDyn V7R5软件环境验证算法的正确性.最后，基于SolidWorks和ADAMS虚拟样机建立柔性空间机器人系统的立体CAD模型，并结合空间在轨搬运任务进行模拟仿真，柔性空间机器人关节操作和运动轨迹的仿真结果图验证了本文算法的有效性.     

空间站燃烧科学实验系统设计

建立空间站燃烧实验系统，可满足未来空间微重力燃烧实验系统需求.通过空间站微重力燃烧实验研究，可拓展空间燃烧学研究.根据所要实现的功能及燃烧实验需求，对中国空间站燃烧柜的燃烧科学实验系统进行了设计和分析.燃烧科学实验系统由8个子系统组成，是一个适合开展气、液、固多种燃料燃烧实验的综合性实验系统.考虑到强度设计要求，在完成方案设计后，对系统进行了有限元分析，并在研制的结构件上进行了力学环境实验.实验与分析结果表明，本文设计的实验系统能够满足环模实验的要求，结构合理可行.      

Injection of 40-kHz-modulated electron beam from the satellite: II. Excitation of electrostatic and whistler waves

Beam-plasma interaction effects are studied during the active space experiment with electron and Xe-ion beam injections in an ionospheric plasma. Permanent 40-kHz-modulated electron beam injection occurs simultaneously with a xenon-ion beam injected by the Hall-type plasma thruster operating in a square-pulse mode (100/50 s for a job/pause duration). The unusual behavior of the background charged particle fluxes and wave activity stimulated during the beam-plasma interaction have been registered by the scientific instruments onboard Intercosmos-25 station (IK-25) and Magion-3 subsatellite. The longitudinal and electromagnetic wave instabilities and their mutual relationship are considered in order to explain the observed effects. The excitation of electrostatic waves by the electron injection has been considered for different resonance conditions near the linear stability boundary. Beam-driven electromagnetic instability is responsible for the backward-propagating whistler waves excited via cyclotron resonance. Competition of these two beam instabilities is one of the subjects of the present study.     

过氧化氢/紫外线/臭氧氧化技术处理肼类污水的应用

采用放大试验规模（处理量1 m³/h）的H₂O₂（过氧化氢）/UV（紫外线）/O₃（臭氧）氧化技术处理肼类推进剂污水，在30.0±1.6 ℃，pH=9.0±0.2的条件下，研究肼类的过氧化氢增强光解臭氧化降解。对比不同氧化技术的协同效应以及对污水降解的影响，重点考察过氧化氢、紫外线、臭氧和初始浓度等工艺参数对降解效果的影响，对氧化技术的应用进行了优化。研究结果表明：该技术可使COD去除率提高27.66%，肼类的降解速率随着过氧化氢投加量、紫外线辐射强度、O₃投加速率和水质地提高而升高，随着初始质量浓度的提高而下降。在最佳工艺下，处理5 000 mg/L质量浓度的废水，处理60 min时，COD去除率分别为98.62%（偏二甲肼）、99.17%（甲基肼）、99.94%（肼）和93.25%（单推-3）。